Isobutylene | VOC | Bump Gas

Brand: GASCO
Gas: 100 ppm isobutylene ((CH3)2C=CH2) balanced with nitrogen (standard VOC bump gas), 10 LITER
Compatible Detectors: FD-90A-VOC, FD-600-VOC, FD-60-VOC, FD-600-VOC-LOW
Safety Data Sheet (SDS): Click Here

• 🚚  SHIPPING: Ships from Florida. 2-week manufacture time. Free HAZMAT USA shipping. USA Shipping only. This item cannot be shipped overseas.

• ⚛️  USE: Your gas detector, meter, or analyzer must be bump tested to make sure it is functioning as expected. GASCO bump gas cans ensure proper bump testing. Daily bump testing is recommended to validate operation and alarm functionality. To operate, tear off the blue tab on the top of the trigger. Then place the nozzle on your monitor's sensor area and squeeze the trigger for 1 to 2 seconds. Confirm the alarms are triggering and the detector responds to the bump gas.

• 🔬 ACCURATE: NIST traceable source calibrated gas. ISO 9001:2008 certified process. Ships with a Certificate of Analysis (COA).

• 🕵️ TRUSTWORTHY: Forensics Detectors is an authorized distributor of GASCO® products. GASCO calibration gas meets or exceeds the requirements of the Original Gas Detection Equipment Manufactures Specifications. 

• ♻️ MATERIALS: Recyclable and disposable.

• 📚 TERMS: Non-cancelable / non-returnable.

• 👩  CONTACT: If other concentrations are required, email sarah@forensicsdetectors.com.

Specifications

Pressure: 160 PSI (Varies with Gas Type)
Gas Type: All Gases (reactive and non-reactive)
Height: 9.5 in
Diameter: 2.75 in
Weight: 0.9 lbs
Material: Aluminum Alloy
Valve Inlet: Trigger Aerosol
Contents Volume: 10 liters
Shelf Life: 24 months